Pavers Chatsworth

Pavers in Chatsworth, CA

Driveways and patios built for Chatsworth rock.

We connect Chatsworth homeowners with one licensed paver contractor. The contractor walks the lot, reads the ground and the grade, and puts a firm price in writing before any work starts.

Roughly $15 to $25 per sq ft installedWritten price after a site visitOne licensed contractor

Get a firm price

Free site visit. No obligation. One contractor calls you back, not five.

Photo to come

What pavers cost in Chatsworth.

These are rough planning figures on a $15 to $25 per square foot range, base preparation, materials and labor included. Nobody publishes an official Chatsworth paver rate, so your written price after the site visit is the number that counts.

A 20 x 20 patioAbout $6,000 to $10,000

400 sq ft at a rough $15 to $25 per sq ft. Level ground sits toward the low end.

1,000 sq ft of paversAbout $15,000 to $25,000

At a rough $15 to $25 per sq ft, before any old surface is torn out and hauled away.

A 20 x 24 ft drivewayAbout $7,000 to $12,000

480 sq ft at a rough $15 to $25 per sq ft. Driveways get a deeper base, so they sit toward the top.

Pavers or poured concreteConcrete costs less

Pavers cost more to put in, but they can be lifted and reset where a slab has to be cut and patched.

ProjectWhere it usually sits in the $15 to $25 range400 sq ft, roughly
Paver patioLow to middle$6,000 to $9,000
Paver drivewayMiddle to top$6,500 to $10,000
Concrete paversLow end$6,000 to $8,000
WalkwayLow end$6,000 to $8,000

Tearing out an old surface or digging into sandstone raises the figure. Level ground with nothing to remove sits toward the low end.

Full Chatsworth cost guideRequest a firm price

Why Chatsworth ground changes the price.

Chatsworth is two kinds of ground. The USDA soil survey maps deep, fast draining sandy loam on the valley floor and rock outcrop in the foothills, where bedrock sits at the surface or within about 15 inches. A paver base is dug in, not laid on top, so where your lot sits decides much of the price.

Sandstone in the foothillsThe Chatsworth Formation is Late Cretaceous sandstone, according to the USGS. On foothill lots the dig can move from a bucket to a breaker, and the spoil is hauled off.
Sandy loam on the flatsLots on the valley floor sit on deep sandy loam with no bedrock listed in the soil survey. The base goes in with ordinary digging, which keeps the price toward the low end.
Permits and the front yardLA's building code exempts walks and driveways no more than 30 inches above grade from a building permit. City code caps a driveway at half the required front yard, and a new or wider curb cut needs a City Engineering permit.
Fire zone in the hillsThe LAFD lists parts of Chatsworth, mainly the hills, in the Very High Fire Hazard Severity Zone. A paver surface does not burn, which counts next to a house up there.

What is really under a paver baseCan you lay pavers on dirt?

Paver work in Chatsworth.

One licensed contractor handles the base, the stone and the finish as one job, starting with a walk of the property.

paver driveway

Paver Driveways

Sized for the loads a Chatsworth approach takes, including trucks and horse trailers on the larger lots.

Paver driveways in Chatsworth
paver patio

Paver Patios

An outdoor room in the stone, color and pattern you choose, set on a compacted base cut to suit the ground under it.

Paver patios in Chatsworth
concrete pavers

Concrete Pavers

A durable, cost effective step up from plain poured concrete, with a wide choice of shapes and tones.

Concrete pavers in Chatsworth
walkway

Walkways and Steps

Paths joining the front, side and back of the property on steady, even footing.

See walkway styles

Looking for wood pavers?Common questions

Only in Chatsworth

Driveways on horse property.

The City Council office for Chatsworth describes a large and thriving equestrian community, and City code allows horses on RA and RE lots of 17,500 square feet or more. Those lots bring long approaches, loaded trailers and a wider turning area, so the base is deepened and the paver thickness is chosen for the heaviest vehicle, not the family car.

Horse property driveways in Chatsworth

Photo to come

Chatsworth paver questions.

How much would a 20 x 20 paver patio cost in Chatsworth?

A 20 x 20 patio is 400 square feet. On a rough planning range of $15 to $25 per square foot, that works out to somewhere around $6,000 to $10,000 with base preparation, materials and labor included. A patio on level ground sits toward the low end. One cut into a slope, or on a foothill lot where the dig meets sandstone, sits toward the top. Tearing out an old slab and hauling it away adds to it.

What does a paver driveway cost in Chatsworth?

Driveways sit toward the top of a rough $15 to $25 per square foot planning range. A 20 x 24 foot driveway, 480 square feet, works out to somewhere around $7,000 to $12,000. Driveways get a deeper base than patios. A new or wider curb cut at the street needs its own City Engineering permit, separate from the driveway itself.

How much is 1,000 square feet of pavers?

On a rough planning range of $15 to $25 per square foot installed, 1,000 square feet works out to somewhere around $15,000 to $25,000. Where it lands depends on the ground, the paver you choose, and how much old surface has to come out first.

Is it cheaper to do pavers or concrete?

Poured concrete usually costs less up front. Pavers cost more to put in, but they can be lifted and reset if the ground settles or a line has to be dug under them, where a slab has to be cut and patched. The contractor can price both at the site visit.

Do I need a permit for a paver patio or driveway?

Usually not a building permit. LA's building code exempts walks and driveways no more than 30 inches above grade. A new or wider curb cut still needs a City Engineering permit. Digging more than 2 feet deep, moving more than 50 cubic yards, or changing how water drains can call for a grading permit. City code also caps a driveway at half the required front yard.

Do pavers hold up on the sloped lots near Stoney Point?

Yes. Interlocking pavers on a compacted base handle grade and ground movement well, which suits the sloped lots near Stoney Point and the Santa Susana foothills. On the steeper approaches the base goes in thinner lifts and is compacted more times than a level lot needs, and the edge restraint is anchored rather than simply set. Surface water is given somewhere deliberate to go at the low end.

Can an existing rock outcrop be kept as part of the design?

Often it can, and it is usually worth keeping. Sandstone breaks the surface on many foothill lots, and a weathered outcrop is a feature no supplier can sell you. Where the rock sits clear of the traffic path, the pavers are laid up to it with a cut border and a drainage detail so water is not trapped against the stone. Where it falls inside a driveway line, the choice is between drilling it out and shifting the alignment. Both are priced at the site visit, so the decision stays yours.

Are the longer driveways on horse property handled differently?

They are. A horse property usually has a long approach, a wider turning area, and traffic that includes loaded trailers rather than family cars, so the base is deepened and the paver thickness is chosen for that load. The open ground on these lots helps, since material can be staged well away from the house instead of on the street. Work is sequenced so at least one route to the barn stays usable.

All Chatsworth paver questionsFull cost guideDriveways over Chatsworth rockPatios cut into the slope

Get a firm price for your lot.

One licensed contractor visits, reads the ground and the grade with you, and puts a written figure in your hands before anything is decided. No pressure.